how to keep aluminum diamond plate shiny
how to keep aluminum diamond plate shiny
Surface Finish: Bright finish, Mill finish
Pattern type: Small five bar,Big five bar,Diamond
Thickness:1.5~4.5mm
Width:1000~1600mm
Length:2000~4000mm
how to keep aluminum diamond plate shiny, aluminium checkered plate, diamond aluminum tread plate, checquered aluminum sheet/coil,
size: 4x8 foot
thickness:2-6mm;
alloy: 1050/1060/3003/5052/5754/6061
how to keep aluminum diamond plate shiny is available in a wide array of thicknesses from .063” (1/16”) to .500 (1/2”). We see .125” or 1/8” being the most common size as it provides some rigidity. Common alloys for aluminium checker plate are 3003 and 6061
we can supply one bar, three bars, five bars, and diamond aluminum checker plate, how to keep aluminum diamond plate shiny, aluminum chequered plate from falls on 1 series, 3 series, 5 series and 6 series, widely used in vehicle and ship manufacturing, machinery manufacturing, transportation and storage, construction and decoration, aerospace and other industries.. and thickness from 0.2-8.0mm, and the coil type even can be up to 2650mm.
Sizes range for how to keep aluminum diamond plate shiny
| Alloy | Temper | Size range (mm) | ||
| Thickness | Width | Length | ||
| 1050A, 1200 |
F | 1.5-2.4 | 800-1500 | 1000-6000 |
| 2.0-6.0 | 800-1500 | 1000-8000 | ||
| F, H114 | 1.5-2.0 | 900-1600 | 1000-4000 | |
| 2.0-8.0 | 900-2000 | 1000-9000 | ||
| 5251, 5052, 5754 |
H114, H224 | 1.5-2.4 | 800-1500 | 1000-6000 |
| 2.4-6.0 | 800-1500 | 1000-8000 | ||
| F, H114,H224 | 1.5-2.0 | 900-1600 | 700-4000 | |
| 2.0-7.0 | 900-2000 | 1000-9000 | ||
| F, H114 | 7.0-8.0 | 900-2000 | 1000-9000 | |
| 5154A | F, H114 | 2.0-6.0 | 900-1600 | 1000-9000 |
| 5086,5083 | F, H114, H224, H116 |
2.0-6.0 | 900-1600 | 1000-9000 |
| 6061, 6082 |
F, 0, T4, T6 | 1.5-2.0 | 900-1250 | 700-4000 |
| 2.0-3.5 | 900-1600 | 1000-4000 | ||
| F, 0 | 2.0-3.5 | 1600-2000 | 1000-4000 | |
| F, 0, T4, T6 | 3.5-4.83 | 900-1250 | 1000-4000 | |
| 3.5-4.83 | 1250-2000 | 1000-4000 | ||
| F, 0 | 4.83-6.35 | 900-2000 | 1000-4000 | |
| 3003 | H224 | 1.5-2.0 | 800-1524 | 1000-4000 |
| 2.0-2.4 | 800-1524 | 1000-6000 | ||
| 2.4-6.35 | 800-1524 | 1000-8000 | ||
Sizes range for how to keep aluminum diamond plate shiny
|
Alloy
|
Temper
|
Size range (mm)
|
|||
|
Thickness
|
Width
|
Diameter
|
|||
|
Inside
|
Outside
|
||||
| 5251, 5052, 5754 |
H114, H224 | 1.5-3.0 | 800-1500 | 500, 610 | Max.1600 |
| 3.0-6.0 | 800-1500 | 750 | Max.1600 | ||
| F, H114, H224 | 3.0-7.0 | 1250-2000 | 600 | Max.1800 | |
| F, H114 | 7.0-8.0 | 1250-2000 | 600 | Max.1800 | |
| 5154A, 5086, 5083 |
F, H114 | 3.0-6.0 | 1250-2000 | 600 | Max.1800 |
| 1050A, 1200, 3003 |
F, H114 | 3.0-8.0 | 1250-2000 | 600 | Max.1800 |
| 3003 | H224 | 1.42-3.1 | 800-1524 | 500, 610 | Max.1600 |
Chemical Properties(WT.%)
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | impurities | Al | note |
| 1050 | <0.25 | <0.40 | <0.05 | <0.05 | <0.05 | <0.05 | <0.03 | Other, each 0.03 | >99.5 | V<0.05 | |
| 1060 | <0.25 | <0.35 | <0.05 | <0.03 | <0.03 | <0.05 | <0.03 | Other, each 0.03 | >99.6 | V<0.05 | |
| 1070 | <0.20 | <0.25 | <0.04 | 0.03 | 0.03 | 0.04 | 0.03 | Other, each 0.03 | >99.7 | V<0.05 | |
| 1100 | Si +Fe <0.95 | 0.05-0.20 | <0.05 | <0.10 | Other, each 0.03 | >99.00 | V<0.05 | ||||
| 3003=АМц | <0.6 | <0.7 | 0.05-0.20 | 1.0-1.5 | <0.10 | Other,each 0.05, total 0.15 | |||||
| 3004 | <0.30 | <0.7 | <0.25 | 1.0-1.5 | 0.8-1.3 | <0.25 | Other,each 0.05, total 0.15 | ||||
| 3105 | <0.6 | <0.7 | <0.30 | 0.30-0.8 | 0.20-0.8 | <0.20 | <0.4 | <0.10 | Other,each 0.05, total 0.15 | ||
| 5052=АМг2.5 | <0.25 | <0.40 | <0.10 | <0.10 | 2.2-2.8 | 0.15-0.35 | <0.10 | Other,each 0.05, total 0.15 | |||
| 5083=АМг4.5 | <0.40 | <0.40 | <0.10 | 0.40-1.0 | 4.0-4.9 | 0.05-0.25 | <0.25 | <0.15 | Other,each 0.05, total 0.15 | ||
| 6061=АД33 | 0.40-0.8 | <0.7 | 0.15-0.40 | <0.15 | 0.8-1.2 | 0.04-0.35 | <0.25 | <0.15 | Other,each 0.05, total 0.15 | ||
