aluminium round hole sheet
|
Alloy Series |
Typical Alloy |
Thickness (mm) |
Width (mm) |
Length (mm) |
Temper |
Standard |
|
1000 Series |
1050 1060 1070 1100 |
0.2-60
|
500-2000
|
According to requirement
|
H112, H24, O, etc. |
ASTM B209/ GB/T3190-1996 |
|
5000 Series |
5052 5083 5754 5005 5086 |
H32, H12,H111, H24, O, etc. |
ASTM B209/ GB/T3190-1996 |
|||
|
6000 Series |
6063 6061 |
H112, T6, T651, T5, T4, O, etc. |
ASTM B209/ GB/T3190-1996 |
|||
|
* Other alloys are available upon customer demand. |
||||||
|
Alloy |
Temper |
|
1050 1060 1070 1100 |
H112, H24, O |
|
2024 LY12 LY11 2A11 2A14 2017 2A17 |
H112, T4, T351, T6 |
|
3A21 3003 3103 3004 3005 3105 |
H112, H24, O |
|
5052 5754 5005 5083 5086 |
H32, H112, H111, H24, O |
|
6063 6061 |
H112, T6, T651, T5, T4,O |
|
Specification |
1.Thickness: 0.2-60mm 2.Width: 500-2000mm 3.Length:According to requirement 4.Temper: Various status Sheets can be produced as your request. |
|
Application |
Mainly used in construction, decoration, packaging, printing, covers material, signs,billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration |
2. Chemical Composition:
|
Alloy Series |
Typical Alloy |
|
1000 Series |
1050 1060 1070 1100 |
|
2000 Series |
2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17 |
|
3000 Series |
3A21, 3003, 3103, 3004, 3005, 3105 |
|
4000 Series |
4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A |
|
5000 Series |
5052, 5083, 5754, 5005, 5086,5182 |
|
6000 Series |
6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02 |
|
7000 Series |
7075, 7A04, 7A09, 7A52, 7A05 |
Round holes patterns can be used to:
Grind seed and spices
Separate rock or ore
Filter and control gas and fluids
Suppress noise in jet engines while allowing air flow
Filter air to keep electronic equipment clean and cool
Provide security in doors, windows and gates
Add creativity to store fixture displays
These are achieved with patterns with 12% to 67% and greater open area, but most patterns are 23% to 58% open area.
